Polaris Ranger Turn Signals
Polaris Ranger Turn Signals
Looking for Polaris Ranger turn signals to make your Polaris Ranger, Crew, Diesel, Full-size or Mid-size street legal? You have come to the right place! Hence, we have developed D.O.T. approved Polaris Ranger turn signals. To clarify, our kits will help you make your UTV (side-by-side) street legal.
For instance, having a Street Legal Polaris Ranger, Crew or Diesel UTV is just awesome. In other words with the right Polaris Ranger turn signals, you can really tackle every type of terrain. That is to say you can go from pavement, to off-road trails and back again. Subsequently we build the Polaris Ranger turn signals and accessories you need. For instance, D.O.T. approved LED Turn Signal Kits, Horn Kits and LED Lighted License Plate Brackets. As a result you can safely and effectively ride on the streets in your area.
D.O.T. Approved Polaris Ranger Turn Signals
The Polaris Ranger Turn Signals are intended to help you convert your off-road UTV (side-by-side) to a street legal ride in many states. In addition our kits include parts that are actually D.O.T. approved items. That is to say, you will need these while converting your off-road recreational vehicle to street legal status. Meanwhile, be careful as some of our competitors out their Do Not use D.O.T. approved parts. Consequently they will sell you a Polaris Ranger turn signals kit that it is not D.O.T. approved.
All states have their own D.O.T. requirements for street legal equipment. Most importantly, check with your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD). Certainly get the information for your local requirements. Furthermore, most states require a Horn (120 db+), Lighted License Plate and Turn Signals. However, not all states require turn signals (hand signals are ok). Above all, we highly recommend turn signals for your added safety. That is to say, we know through experience that some drivers DO NOT know what hand signals are.
Why Our Polaris Ranger Turn Signals are Completely Independent
I get asked a few times every month, why don’t you use the Polaris Ranger rear OEM lights for the rear turn signals? The answer is very simple. I developed my Turn Signal Kits (TSK) to be completely independent for THREE main reasons. ONE, you do not want any possible feedback from the LED Electronic Flasher into the ECU of your UTV. Consequently, electronic feedback can cause problems with your ECU and they are very expensive to replace. TWO, you do not want to affect (invalidate) your manufactures warranty by tapping into any existing OEM lights or wiring. THREE, you want both rear stop lights when activating the turn signals (like our automobiles), not just one. As a result, with all my different Polaris Ranger turn signal kits you will never have these concerns or issues.
Polaris Ranger Turn Signals
Column Mounted (TSS) Hardware Notes
Standard (TSS) Mounting Hardware Notes
All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware. Used with our stock #104, #105 or #107-SM LED Turn Signal Kits. As a result, order from the drop down box Turn Signal Switch Mounting Hardware.
- 1999-2008 Ranger all models
- 2008-09 Ranger 700 Crew
- 2018-21 Youth Ranger 150
If you have 3″ inches or more of clear steering column space, the Standard Turn Signal Switch (TSS) mounting hardware will work great!
Polaris Ranger Turn Signals
2009-14 Polaris Ranger Full-size models (TSS) Mounting Hardware Notes
The 2009-10 Polaris Ranger 500 and 2009-14 Ranger 700/800/900 XP (not 2014 Deluxe), HD & HO. Also, the 2010-14 Ranger 800 Crew & 6×6, 2011-14 Ranger Diesel and the 2017-18 Polaris ACE 500 models. That is to say the full-size models with Tilt Steering use our Custom Turn Signal Switch (TSS) Mounting Strap. This custom strap allows the tilt steering to have full range of motion. Meanwhile the turn signal switch is mounted just under the steering wheel. Used with our stock #104, #105 or #107-SM LED Turn Signal Kits. As a result, order from the drop down box Turn Signal Switch Mounting Hardware.
- 2009-10 Ranger 500 (TSS) Strap
- 2009 Ranger 700 XP & HD (TSS) Strap
- 2010-14 Ranger 800 XP-HD-HO (TSS) Strap
- 2010-14 Ranger 800 Crew (TSS) Strap
- 2010-2014 Ranger 800 6×6 (TSS) Strap
- 2013 Ranger 900 XP (TSS) Strap
- 2011-14 Ranger Diesel (TSS) Strap
- 2012-14 Ranger Diesel Crew (TSS) Strap
- 2013-14 Brutus, HD, PTO (TSS) Strap
Polaris Ranger Turn Signals
2014-21 Polaris Ranger Full-size and 2015-21 Polaris Ranger Mid-size models (TSS) Mounting Hardware Notes
The 2014-21 Polaris Ranger 900/1000 XP, Deluxe, Crew, 2015-21 Polaris Ranger 570 & 570 Crew Full-size. Also, the 2015-21 Polaris Ranger 2-Passenger EV / ETX / 500 / 570 Mid-size / 4-Passenger 570 Crew Mid-size. In addition the 2015-18 Polaris Ranger Diesel & 800 6×6 models. Subsequently, these models use our Custom Ranger Deluxe Turn Signal Switch (TSS) Mounting D-Bracket. Used with our stock #104, #105 or #107-SM LED Turn Signal Kits. As a result, order from the drop down box Turn Signal Switch Mounting Hardware.
- 2014-19 Ranger 900 XP (TSS) D-Bracket
- 2014-18 Ranger 900 Deluxe (TSS) D-Bracket
- 2014-19 Ranger 900 Crew (TSS) D-Bracket
- 2016 Ranger 900 High Lift TSS D-Bracket
- 2017-21 Ranger 1000 & XP (TSS) D-Bracket
- 2017-21 Ranger 1000 Crew (TSS) D-Bracket
- 2017-2021 Ranger 1000 High Lift TSS D-Bracket
- 2017-21 Ranger 1000 Northstar TSS D-Bracket
- 2019 Ranger 1000 Back Country TSS D-Bracket
- 20-21 Ranger 1000 Texas Edition TSS D-Bracket
- 2021 Ranger 1000 Trail Boss TSS D-Bracket
- 2021 Ranger 1000 Big Game Ed. TSS D-Bracket
- 2021 Ranger 1000 Waterfowl Ed. TSS D-Bracket
- 2015-21 Ranger 570 Full-size TSS D-Bracket
- 2015-21 Ranger 570 Crew F.S. TSS D-Bracket
- 2015-17 Ranger 800 6×6 (TSS) D-Bracket
- 2015-18 Ranger Diesel (TSS) D-Bracket
- 2015-18 Ranger Diesel Crew TSS D-Bracket
- 2015-16 Ranger ETX (TSS) D-Bracket
- 2015-21 Ranger EV & LI-ION (TSS) D-Bracket
- 2015-2021 Ranger 570 Mid-size (TSS) D-Bracket
- 2015-21 Ranger 570-4 Crew M.S. (TSS) D-Bracket
- 2017-21 Ranger 500 Mid-size (TSS) D-Bracket
Polaris Ranger Turn Signals
2010-14 Polaris Ranger Mid-size models (TSS) Mounting Hardware Notes
The 2010-14 Polaris Ranger Mid-size EV & 400. Also, the 2011-13 Ranger Mid-size 500 & 500 Crew. In addition the 2014 Ranger Mid-size 570 & 570 Crew. Finally the 2013-14 Ranger Mid-size 800 models. Subsequently these models use our Custom Turn Signal Switch (TSS) Mounting Plate. To clarify, this custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Used with our stock #104 or #107-SM LED Turn Signal Kits. As a result, order from the drop down box Turn Signal Switch Mounting Hardware.
- 2010-14 Ranger Mid-size EV/400 (TSS) Plate
- 2011-13 Ranger Mid-size 500 (TSS) Plate
- 2011-13 Ranger 500 Crew (TSS) Plate
- 2014 Ranger Mid-size 570 (TSS) Plate
- 2014 Ranger Mid-size 570 Crew (TSS) Plate
- 2013-14 Ranger Mid-size 800 (TSS) Plate
Polaris Ranger Turn Signals
SM LED Turn Signal Kit
(Stock# 104) / (Base Price: $129.95)
The SM LED Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required). In addition, our SM LED light kit comes with 2 surface mounted ¾” inch amber (front) LED lights. Also, 2 surface mounted ¾” inch red (rear) LED lights. However, you can add additional lights to give your Polaris Ranger, Crew, Diesel, full-size or mid-size a custom look.
Polaris Ranger Turn Signals Specifications
This SM LED light kit comes with a column mounted turn signal switch. First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). Secondly, the turn signal switch has a pull out flare tab for the 4-way hazard lights. Finally, it comes with the hardware to mount it to your steering column.
The four Surface Mounted LED Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting. Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). Thirdly, these SM LED’s are D.O.T. approved. In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output. Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing. Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.
This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER. Also, the electronic LED flasher is quite, no annoying clicking sounds.
Our kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets. Secondly, the Turn Signal Switch with the hardware to mount it to your steering column (see TSS mounting hardware notes above). Also, the LED Flasher with mounting hardware. Furthermore, an ATC in-line fuse holder with a 3 amp fuse. In addition, the mounting installation instructions with wiring instructions & diagram. Most importantly, with our Polaris Ranger turn signals you get all the help and support you need from EZ Turn Signal Kits.
Important Note
Note FYI: I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true! Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true! In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day. Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.
Polaris Ranger Turn Signals Installation
This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty! In addition, each wire has a different color and the wiring diagram shows where each colored wire goes. Above all, I include my phone number and e-mail address with the instructions. Therefore, if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. Meanwhile, the Motor Vehicle Department and your local police departments will be impressed. Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.
The SM LED Turn Signal Kit will fit all the Polaris Ranger, Crew, Diesel, full-size & mid-size models (check the TSS mounting hardware notes above).
In addition you can customize the UTV with Double or Triple lights. As a result, order from the drop down box Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Likewise you may want amber lights front and rear. As a result, order from the drop down box Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
Polaris Ranger Turn Signals Options
SM LED Turn Signal Kit #104 Options:
Option1 – Double or Triple Lights for a custom look!
Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.
Option3 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.
Option4 – Dash Indicators for those that want one or two dash indicators.
You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.
Choose Your Options & Add to Cart
Choose Your Options & Add to Cart
Customer Reviews SM LED Turn Signal Kit #104
Polaris Ranger Turn Signals
LED Turn Signal Kit
(Stock# 105) / (Base Price: $149.95)
This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) or your choice of all Amber D.O.T. approved LED lights. Our LED light kit comes with two 4″x 2″ inch rectangular amber (front) and two 4″x 2″ inch rectangular red (rear) LED lights. However, you can substitute the rear lights for the ¾” SM LED lights. Therefore, to give your Polaris Ranger, Crew or Diesel full-size a custom look.
Polaris Ranger Turn Signals Specifications
This LED light kit comes with a column mounted turn signal switch. First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). Secondly, our turn signal switch has a pull out flare tab for the 4-way hazard lights. Finally, it comes with the hardware to mount it to your steering column.
The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each. In addition, they have a polycarbonate lens & housing and come with encapsulated electronics to eliminate corrosion. Also, you can substitute the 4″x 2″ (rear) LED lights for the ¾” SM LED lights to add a custom look.
This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER. Also, the electronic LED flasher is quite, no annoying clicking sounds.
Our kit includes: 2 Amber and 2 Red or all Amber D.O.T. approved LED lights. Secondly, the turn Signal Switch and the hardware to mount it to your steering column (see TSS mounting hardware notes above). Furthermore, the LED Flasher, an ATC in-line fuse holder with a 3 amp fuse. Also, the self tapping screws for mounting the lights and flasher. In addition, the mounting installation instructions with wiring instructions & diagram. Most importantly, with our Polaris Ranger turn signals you get all the help and support you need from EZ Turn Signal Kits.
Important Note
Note FYI: I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true! Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true! In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day. Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.
Polaris Ranger Turn Signals Installation
This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty! In addition, each wire has a different color and the wiring diagram shows where each colored wire goes. Above all, I include my phone number and e-mail address with the instructions. Therefore, if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. Meanwhile, the Motor Vehicle Department and your local police departments will be impressed. Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.
The LED Turn Signal Kit will fit all the Polaris Ranger, Crew and Diesel full-size models (check the TSS mounting hardware notes above).
In addition you may like amber lights front and rear. As a result, order from the drop down box Light Options: Amber Kit: All 4 Amber lights.
Likewise you can substitute the 4″x 2″ (rear) LED lights for the ¾” SM LED lights to add a custom look. As a result, order from the drop down box Light Options: 2 Amber ¾” LED Lights or 2 Red ¾” LED Lights or 4 Amber ¾” LED Lights or 4 Red ¾” LED Lights.
Polaris Ranger Turn Signals Options
LED Turn Signal Kit #105 Options:
We have some Custom Kit Brackets, UTV Wire & Connector Kit and Dash Indicators. Therefore, you may want to use these with your LED Turn Signal Kit. That is to say, any of these options purchased with your kit, will save you time & money!
Option1 – Your choice of lights to make your UTV have a custom look.
Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.
Option3 – The 09-19 Ranger 800-900-1000 XP/HD/HO/Crew/6×6/Diesel/570 Full-size Front Flare Brackets (FFB). First of all these will give your 2009-2010 Ranger 500 or 2009-2019 Ranger 800/900/1000 XP, HD, HO & Deluxe models an OEM look. Secondly these will give your 2010-2019 Ranger 800/900/1000 Crew & 6×6 models or 2011-2018 Ranger Diesel models an OEM look. Finally these will give your 2015-2019 Ranger 570 Full-size models an OEM look. However, see the following notes.
Note1: These FFB’s DO NOT work on the Ranger Mid-size EV/ETX/400/500/570/800 models.
Note2: The 2018-19 Ranger 1000 XP does not have front flare openings in their new front design.
Note3: Also, the 2019 Ranger Crew 1000 does not have front flare openings in their new front design.
Option4 – If you don’t have a rear bumper, you might want to use our Rear T-Brackets (4″ x 2″ lights only).
Option5 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.
Option6 – Dash Indicators for those that want one or two dash indicators.
You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.
Choose Your Options & Add to Cart
Choose Your Options & Add to Cart
Customer Reviews LED Turn Signal Kit #105
Polaris Ranger Turn Signals
SM LED Running Lights & Turn Signal Kit
(Stock# 107-SM) / (On Sale/Base Price: $149.95)
This is a 12 volt LED Running Lights & Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required). In addition, our LED running lights & turn signal light kit comes with 2 surface mounted ¾” inch amber (front) LED lights. Also, 2 surface mounted ¾” inch red (rear) LED lights. However, you can add additional lights to give your Polaris Ranger, Crew, Diesel, full-size or mid-size a custom look.
Polaris Ranger Turn Signals Specifications
This SM LED running lights & turn signal kit comes with a column mounted turn signal switch. First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). Secondly, the turn signal switch has a pull out flare tab for the 4-way hazard lights. Furthermore, it comes with the hardware to mount it to your steering column.
The four Surface Mounted LED Dual Mode Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting. Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). Furthermore, they have 3 lead wires each, one for ground, one for normal mode (running) and one for high mode (signals). In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output. Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing. Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.
This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER. Also, the electronic LED flasher is quite, no annoying clicking sounds.
The Running Light Switch is a LED waterproof illuminated rocker switch. Above all, it is easy to install, vibration resistance, and will illuminate when activated.
Polaris Ranger Turn Signals
Our SM LED Running Lights & Turn Signal Kit includes. 2 Amber and 2 Red SM LED Dual Mode super bright lights with grommets. Secondly, the Turn Signal Switch and the hardware to mount it to your steering column (see TSS mounting hardware notes above). Also, a waterproof LED rocker switch and special LED Flasher with mounting hardware. Furthermore an ATC in-line fuse holder with a 3 amp fuse. In addition, the mounting installation instructions with wiring instructions & diagram. Most importantly, with our Polaris Ranger turn signals you get all the help and support you need from EZ Turn Signal Kits.
Important Note
Note FYI: I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true! Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true! In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day. Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.
Polaris Ranger Turn Signals Installation
This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty! In addition, each wire has a different color and the wiring diagram shows where each colored wire goes. Above all, I include my phone number and e-mail address with the instructions. Therefore, if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. Meanwhile, the Motor Vehicle Department and your local police departments will be impressed. Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.
The SM LED Running Lights & Turn Signal Kit will fit all the Polaris Ranger, Crew, Diesel, full-size & mid-size models (check the TSS mounting hardware notes above).
In addition you can customize the UTV with Double or Triple lights. As a result, order from the drop down box Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Polaris Ranger Turn Signals Options
SM LED Running Lights & Turn Signal Kit #107-SM Options:
Option1 – Double or Triple Lights for a custom look!
Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.
Option3 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.
Option4 – Dash Indicators for those that want one or two dash indicators.
You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.
Choose Your Options & Add to Cart
Choose Your Options & Add to Cart
Customer Reviews SM LED Running Lights & Turn Signal Kit #107-SM
Polaris Ranger Turn Signals
UTV / ATV Toggle Switches
LED Turn Signal Kit
with Emergency Flashers
(Stock# 604) / (Base Price: $99.95)
This is a 12 volt Toggle Switches LED Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required). Our Toggle Switches (TS) LED light kit comes with 2 surface mounted ¾” inch amber (front) LED lights. In addition, 2 surface mounted ¾” inch red (rear) LED lights. However, you can add additional lights to give your Polaris Ranger a custom look.
Polaris Ranger Turn Signals Specifications
Our Toggle Switches LED Turn Signal Kit comes with two toggle switches. In addition, 2 LED indicator lights for the Turn Signals and 4-way Emergency Flashers (hazard warning).
The four Surface Mounted LED Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting. Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output. Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing. Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.
This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER. Also, the electronic LED flasher is quite, no annoying clicking sounds.
Our toggle switches LED turn signal kit includes. 2 Amber and 2 Red SM LED super bright lights with grommets. Secondly, two (2) Toggle Switches with Rubber Boots. In addition two (2) LED indicator lights for the turn signals and 4-way emergency flashers. Also, the LED Flasher with mounting hardware. Furthermore, an ATC in-line fuse holder with a 3 amp fuse. Finally, the mounting installation instructions with wiring instructions & diagram. Most importantly, with our Polaris Ranger turn signals you get all the help and support you need from EZ Turn Signal Kits.
Polaris Ranger Turn Signals Installation
This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty! In addition, each wire has a different color and the wiring diagram shows where each colored wire goes. Above all, I include my phone number and e-mail address with the instructions. Therefore, if you have any questions about your installation you can contact me.
These turn signal toggle switches are very nice and easy to operate. Meanwhile, the Motor Vehicle Department and your local police departments will be impressed. Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.
Note: The steering column mounted turn signal switch is the safest and easiest to operate. Most Importantly, we always recommend that you install a steering column mounted turn signal switch kit. To clarify, we recommend our (stock# 104, 105 or 107-SM) on a UTV side-by-side (if you have the steering column space), for your added safety. In other words, a steering column mounted turn signal switch is located in the same area as your automobile. To clarify, it comes natural for activating while keeping your eyes on the road.
The Toggle Switches LED Turn Signal Kit will fit all years for the Polaris Ranger models.
In addition you can customize the UTV with Double or Triple lights. As a result, order from the drop down box Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Likewise you may want amber lights front and rear. As a result, order from the drop down box Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
Polaris Ranger Turn Signals Options
Toggle Switches LED Turn Signal Kit #604 Options:
Option1 – Double or Triple Lights for a custom look!
Option2 – TS Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.
You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.
Choose Your Options & Add to Cart
Choose Your Options & Add to Cart
Customer Reviews Toggle Switches LED Turn Signal Kit #604
Please let us know if you have any questions or need assistance, you can call us at (843) 725-8890 or send an e-mail to Jake@LEDTSK.com
In addition, have you seen our Polaris Street Legal Kits?
Meanwhile, have you seen the new Polaris models?