One LED Back-Up Light (#356)

LED Back-up Light

If you already have back-up lights mounted on your recreational vehicle and want to change them to LED.  For instance, you can purchase the LED Back-Up Light separately.  You can remove your existing light(s) and use the existing wiring to operate this LED light.  Our Back-Up Light only draws 1.7 amps and puts out 1800 lumens.  Consequently, this will save your battery and the abuse on your charging system.

Maybe you want to have two (2) or three (3) back-up lights?  That is to say, you can purchase extra lights and add them into the circuit.

• Note:  DO NOT exceed more than three (3) LED Back-Up Lights on one circuit.
• Note:  If you have 2 or 3 LED back-up lights on one circuit, remember to change the fuse to a 7.5 or 10 amp.

The size and shape of our back-up light allows it to fit almost anywhere. Firstly, its cast aluminum housing, durable black powder coat finish and polycarbonate lens are sealed against the elements for years of trouble free operation. Secondly, the aluminum housing features over-sized heat sinks, which keeps the temperature down and allow the LED’s to run cooler and brighter.  In addition, our LED light projects light at a 90° degree flood beam pattern.  Furthermore, that provides maximum illumination for both rear and peripheral visibility. Finally that makes this LED light perfect for use as a reverse back-up light.

Specifications

The LED Back-up Light is 4.3” x 2.4” x 2.2” rectangular with 2 High Output 10W Bright LED’s.  Moreover it has a Flood Beam (90° degree) Pattern with a 10-30 volt DC input voltage.  Furthermore, it puts out 1800 Lumens and only draws 1.7 amps.  In addition, it comes with a stainless steel 3/8 x 7/8” inch bolt and mounting bracket.  Finally, it has a black aluminum housing, clear polycarbonate lens and it is rated for 30,000 hours.

Installation

Mounting the LED Back-Up Light:  The LED reverse back-up light mounts in a 3/8″ inch hole. In addition most of the newer UTVs & ATVs come with mounting tabs or locations for mounting AUX lights. Furthermore, you can drill a 3/8″ inch hole in some cases where you want to mount the light. Finally, you can use a vinyl/rubber coated, plastic, aluminum billet or steel clamp that will allow you to mount the light to the roll cage or bumper (optional).

You can order whatever options you want by using the drop down (∇) menus above.

Looking for a complete LED Back-up Light Kit #350.

Have you seen the new Polaris models?